Seamsealer :: Automotive

SEAMSEALER

Total Coat Seam Sealer is a liquid plastic product with creamy consistence, designed for filling and sealing metallic joints. This product provides highly hermetic performance that avoids corrosion due to entrapped moisture.
It’s suitable for body shops and blacksmithing in general.
Total Coat Seam Sealer replaces common products that are harmful to health thus require breathing, eye and skin protection.

Benefits

	Ready to use. Easy handling.
	Water based. 100% silicon free.
	No special application tool required: Just a common domestic cartridge gun.
	100% solvents free. Clean and safe.
	Allows direct finish off with bare hands or fingertips (is not an skin irritant). A wet hand brush is also suitable.
	Strong adherence on metals, primers, fiberglass and painted surfaces.
	Permanent flexibility and elasticity. No cracks or fissures.
	High mechanical and chemical resistance.
	Excellent waterproofing properties for body joints.
	Odorless. Air drying.
	Non flammable.
	Ambient friendly. No PVC’s, VOC’s, asbestos or toxics components.
	Air drying with no dripping
	Can be painted.
	Long shelf life. Wont dry inside the cartridge.

:: back to top

APPLICATION PROCESS

1. Surfaces must be clean, free of dust, grease, oil, rust, etc.
2. Cut the cartridge tip and apply directly along the joint to be sealed.
3. Work seam by means of a wet hand brush, spatula or thumb.
4. Let dry at 72 F minimum, for 2 to 6 hours.
5. Avoid direct contact with water during curing.
6. Cover tip carefully after use.
7. Keep from freezing and avoid storage in hot places.

:: back to top

:: Language :: Index :: Who we are :: Contact us :: Links ::

<< SOUND CONTROL :: AUTOMOTIVE >>